I spent a few minutes during today’s work session treating some parts with Alumiprep and Alodine. Pictured below is the F-1403D-R & -L Forward Center Section Side Angle. The edges have been cleaned and the holes deburred.....now waiting to be Akzo primed.
These are the F-01441-L & -R Bearing Bracket Braces and associated Bearing Bracket Angles that were prepared in Part 3. After separating the parts, cleaning the edges, and deburring the holes, the parts were treated with Alumiprep and Alodine. They are now hanging up to dry prior to being Akzo primed.
While I was treating stuff with Alumiprep and Alodine, I decided to treat the two CS-00012 Torque Tube to Bellcrank Pushrods. They are shown below hanging up to dry.
