I worked on the Bottom Inboard and Bottom Outboard Wing Skins for the Right Wing. All the edges have previously been cleaned and all the holes deburred. So, all that remains is to dimple the #19 and #40 holes. I used the DRDT-2 for a majority of the dimpling, but did use the pneumatic squeezer for many of the holes around the edges.
This blog was created to memorialize the building process of my Van's Aircraft RV-14 and to satisfy the requirements for certification in the Experimental Amateur Built Aircraft category. It will also serve as a central location for ME to reference in the future on processes and techniques I used during the build. Additionally, it will allow my family, friends, and other interested builders the opportunity to follow along during my build…..and might be helpful to someone along the way.