We finished riveting the J-Stiffener into the Left Wing. There are only 10 universal rivets left to set in this Wing that connects the Outboard Aileron Bracket to the Rear Spar and Rib. We will set those 10 rivets during the next session.
Here it’s he opposite side showing the riveted J-Stiffeners.
Just a close up of a section to J-Stiffener riveted to the Top Skin.
View of the Right Wing laying flat with all the rivets installed.
In addition to the 10 universal rivets mentioned above, seven #8 screw holes will need to be countersunk to fit the Skin of a #8 dimple. In the picture below, the countersunk hole on the right is one of the holes mentioned in this section. (The one one the left was completed in an earlier section).
*****131 Rivets Installed*****