In Part X, I talked about messing up the forward holes on the Right Lower Longeron Assembly. As I discussed, instead of coming up with a fix, I decided to order new parts and make it right. These are the three new parts that I needed to rebuild the Longeron Assembly.....
- F-01444-R: Longeron, FWD Fuselage
- F-01444A: Doubler, Longeron
- F-01489-R: Bracket Lower Engine Mount
Here are the pieces after all the prep work was completed.
This is a close up of the area where material had to be removed (shown in the white).
Here is the opposite end of the Longeron with the removed material. You can see how the piece angles thinner from right to left.
