JVL’s RV-14: Wings, Rear Spar (Part 7)

This blog was created to memorialize the building process of my Van's Aircraft RV-14 and to satisfy the requirements for certification in the Experimental Amateur Built Aircraft category. It will also serve as a central location for ME to reference in the future on processes and techniques I used during the build. Additionally, it will allow my family, friends, and other interested builders the opportunity to follow along during my build…..and might be helpful to someone along the way.

Wednesday, January 10, 2018

Wings, Rear Spar (Part 7)

Finally.....I was able to get all the Inboard and Outboard Aileron Hinge Bracket parts and Rear Spar Doublers primed with Akzo during this session. Tomorrow I will start riveting the four brackets together.

Left Outboard Aileron Hinge Bracket

Left Inboard Aileron Hinge Bracket

Right Inboard Aileron Hinge Bracket

Right Outboard Aileron Hinge Bracket

Left Rear Spar Doublers