Not much to show during this session. I cleaned all the edges on the Top Outboard and Top Inboard Wing Skins. As with the Left Wing, I used 120 and 220 grit sand paper to complete the edge work. I also used my edge forming tool to make the necessary lap joints on the Skins.
This blog was created to memorialize the building process of my Van's Aircraft RV-14 and to satisfy the requirements for certification in the Experimental Amateur Built Aircraft category. It will also serve as a central location for ME to reference in the future on processes and techniques I used during the build. Additionally, it will allow my family, friends, and other interested builders the opportunity to follow along during my build…..and might be helpful to someone along the way.