The following picture was sent to me on March 9, 2022.
Getting close to the end!!!!! Almost there!!!!! Jason just needs to wire the circuit breaker panel (mostly the bundle of red wires on the bottom left). These wires will go into a plug that can be detached from the circuit breaker panel itself. The last thing to do is cut off the zip ties and replace them with avionics string (which will be done when the painting and etching is completed on the final panel).
After the circuit breaker panel is wired….she has power!
Demo mode on the G3X PFD.
*****Pictures are from Jason at Aerotronics*****