I took a break from the Rudder tonight because I'm not 100% confident in the process I'm going to use to rivet the trailing edge. I've read the directions in the plans several times and have seen a few different methods on other build sites. I just need to do a little more research to determine exactly how I want to complete the task. So, in the meantime, I started working on the Horizontal Stabilizer again.
All of tonight's work was deburring the holes on the Spar, Spar Doubler, and the two Spar Caps. So, there isn't much to show here. The pieces are now ready for Alumiprep, Alodine, and Primer.