JVL’s RV-14: Empennage, Horizontal Stabilizer (Part 12)

This blog was created to memorialize the building process of my Van's Aircraft RV-14 and to satisfy the requirements for certification in the Experimental Amateur Built Aircraft category. It will also serve as a central location for ME to reference in the future on processes and techniques I used during the build. Additionally, it will allow my family, friends, and other interested builders the opportunity to follow along during my build…..and might be helpful to someone along the way.

Monday, May 1, 2017

Empennage, Horizontal Stabilizer (Part 12)

I used the Akzo Nobel Epoxy Primer to prime the parts I prepared last night with Alodine. Here are a few pictures of the HS-905 Nose Ribs, HS-1004 Inspar Ribs, and HS-904 Inspar Ribs after being sprayed. Tomorrow I will spray the inside of the Skins and begin assembly of the Horizontal Stabilizer.