Today’s session was spent Akzo priming all the parts that were treated yesterday. I did, however, make a small little mistake. Below is a picture of the Top and Bottom Skins.....can you see the mistake?
The aft portion of the Skins (where the Trailing Edge V-Channel will go) should have been taped off and NOT primed to allow for adhesion of the 3M F9460PC Adhesive Transfer Tape. I don’t “think” this is that big of a deal and I will use grey Scotchbrite to scuff the area.....that should help with the adhesion.
Here is the Nose Skin.....
.....the Spar.....
.....small Ribs, Doublers, Hinge Brackets.....
.....and the eight Ribs.
