OK. I know I said I was going to concentrate on one Tank at a time.....starting with the Left. Well, I still am....except for today. Since I already installed, riveted, and Prosealed the two Fuel Flanges and Anti-Rotation Plate on the Left Tank Inboard Rib-AFT.....thought I would do the same for the Right.....so I did!
Here is the interior side of the Right Tank Inboard Rib-AFT showing the two Fuel Flanges and the Anti-Rotation Plate.
And here is the back. I used an acid brush to apply the Proseal on both sides and a rag dipped in MEK to remove the excess.
This didn’t take long and now it’s finished for when I start on the Right Tank.