While waiting.....I decided to keep making forward progress and start preparing some parts in the next section. To start the section, the four CS-00018A Brake Pedal Pads we’re separated (bottom left).....then the four CS-00018B Brake Pedal C-Channel with the Bearing Block Template (bottom right).....then the eight CS-00018C Brake Pedal Z-Channels (top).
Here are all the parts shown above separated into individual pieces.
Then, I read step 3 of the plans.....which said there were EIGHT CS-00018C Brake Pedal Z-Channels. So, here is the other strip.....
.....and the other strip separated.
During the next session, I will start cleaning all the edges and deburring the holes.