Not much to show during today’s work session. I countersunk the 11 #40 holes in the two F-01462A Canopy Hinge Doublers and the eight #40 holes in the two F-01462B Canopy Hinge Doublers. Then, all the parts and pieces prepared in Parts #1 and #2 were treated with Alumiprep and Alodine. I’ll let everything dry overnight and spray them with Akzo Primer during tomorrow’s session.
This blog was created to memorialize the building process of my Van's Aircraft RV-14 and to satisfy the requirements for certification in the Experimental Amateur Built Aircraft category. It will also serve as a central location for ME to reference in the future on processes and techniques I used during the build. Additionally, it will allow my family, friends, and other interested builders the opportunity to follow along during my build…..and might be helpful to someone along the way.