I haven’t posted anything in the last few days (wasn’t much to show for Parts 7 & 8), but I have been working. I will catch the blog up here with the three most recent work sessions.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Sunday, March 29, 2020 (Part 9)
In Part 8, all the parts and pieces were treated with Alumiprep and Alodine. Today’s session was spraying them with Akzo primer. So, here goes.....
This is the F-01455 Sub Panel.....
.....F-14106 Wiring Channel.....
.....F-01494-L & -R Instrument Panel Stand-Offs.....
.....F-01455B Map Box Doubler.....
.....the F-01477-L & -R Connector Brackets and FF-00005 Cowl Pin Retention Bracket.....
.....and the F-01455-L & -C & -R Seal Angles.
There you have it.....that’s all the parts are now Akzo primed. I will start the assembly process during the next session.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Saturday, March 28, 2020 (Part 8)
Not much to show, but I spent this session treating all the parts and pieces with Alumiprep and Alodine. I will spray them with Akzo primer during the next session and identify each of the parts.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Friday, March 27, 2020 (Part 7)
I began cleaning the edges of all the parts shown in Part 6.....I finished doing that in today’s session. Here is the pile of parts.....ready to be treated with Alumiprep and Alodine.
