JVL’s RV-14: Finishing, Tail Dragger Landing Gear and Engine Mount (Part 9)

This blog was created to memorialize the building process of my Van's Aircraft RV-14 and to satisfy the requirements for certification in the Experimental Amateur Built Aircraft category. It will also serve as a central location for ME to reference in the future on processes and techniques I used during the build. Additionally, it will allow my family, friends, and other interested builders the opportunity to follow along during my build…..and might be helpful to someone along the way.

Monday, June 14, 2021

Finishing, Tail Dragger Landing Gear and Engine Mount (Part 9)

The last part of this section was to install bolts into both the left and right sides of the F-01404 Aft Center Section Bulkhead Assembly. Not much to show here, but there were:

(2) AN5-11A bolts (one on each side)

(6) AN6-12A bolts (three on each side)

The plans are straight forward and the bolts installed very easily, so nothing to really post about it.

SECTION COMPLETE!!!!!